Water Demineraliser Plant

Water Sciences Offers Various Technologies for DM Plant

About Waste DM Plant


Thousands of users of laboratories, factories and workshop throughout the world have found that Water Demineralisers plant is economical and the simplest way to produce distilled quality water almost free dissolved solids.

Water Sciences'D emineralisers are up flow two bed/ mix bed type. Compact and simple to operate with conductivity meter to monitor quality of treated water continuously when in operation.

Water Sciences, Demineralisers are available in different models to suit any of your requirement.

Two Bed Up-flow Demineraliser Plant


Water free from minerals is called demineralised water. Water contains many minerals salts in dissolved form which is called dissolved solids. To remove salts from water, it is treated with cation and Anoin resin coloum. The raw water is passed through cation resin coloum (H+ form) which converts an ionized salts to equivalent acids, now the acidic water is passed through Anion coloum (OH form) which absorbs acids and water available is Dimineralised water When the resins are exhusted the cation resin coloum is regenerated with HCI and Anion Resin coloum with NaOH solution. After regeneration now the plant will be in position to give deionised water up to next regeneration.

Mix Bed Demineraliser Plant


Water Sciences's Mic bed Demineralisers are single coloum unit in which cation and anion charged resins are in mix bed condition. Water passing through this unit will thus come in contact with numerous deminralising stages. Thus no dissolved solids can escape through mix bed coloums. By this method exterminate pure water can be obtained. For regeneration resins are separated by back-washing the cation resin is regenerated with acid and anion with alkali. After rinsing the resins are mixed again with compressed air.

Specifications


Two bed Demineraliser
Two FRP/MS rubber coated coloum charge with corrosion resistance material fittings for containing cation : One Degasser tower to remove dissolved gases.
Mix bed Demineraliser
One FRP Coloum with cprrosion resitance material fittings for containing cation and anion exchange resin Optional: One motor driven air blower of adequate Capacity for remixing resin.

“TWO BED PORTABLE DEMINERALISER”


MODELMAX.MIN.MAX.MIN.Commercial Grade Hcl Lit.NaoH 100%kgElectrical Conductivity @20 Deg. CpH. Value
AD 10/U100102.50.51.50.3310 ԱS/CM6.5-9
AD 20/U200202.51.56.01.210 ԱS/CM6.5-9
AD 30/U600602.51.510.02.410 ԱS/CM6.5-9
AD 40/U10001002.51.512.02.810 ԱS/CM6.5-9

When Total lonic Load In Raw Water Is 100PPM AS CaCo3

“MIX BED DEMINERALISER”


MODELMAX.MIN.MAX.MIN.Commercial Grade Hcl Lit.NaoH 100%kgElectrical Conductivity @20 Deg. CpH. Value
PMB 66063.51.50.850.251 ԱS/CM6.8-7.2
PMB 25250253.51.51.80.651 ԱS/CM6.8-7.2
PMB 60600603.51.54.01.601 ԱS/CM6.8-7.2

WHEN TOTAL IONIC LOAD IN RAW WATER IS 100 PPM AS CaCo3OUTPUT FROM MIXED BED UNIT IS MUCH MORE WHEN USED AS POLISHER AFTER TWO BED DM UNIT.

“TWO BED INDUSTRIAL DEMINERALISER”


MODELMAX.MIN.MAX.MIN.Commercial Grade Hcl Lit.NaoH 100%kgElectrical Conductivity @20 Deg. CpH. Value
DM-5510001003.52.0204.510 ԱS/CM6.5-9
DM-8015001503.52.0265.610 ԱS/CM6.5-9
DM-10020002003.52.0308.610 ԱS/CM6.5-9
DM-15030003003.52.05011.010 ԱS/CM6.5-9

//]]>